Skin depth and detection ability of magneto-optical imaging for weld defects in alternating magnetic field

To detect and evaluate weld defects, the skin depth and detection ability of magneto-optical imaging (MOI) for weld defects in alternating magnetic field were studied, and the application scope of MOI in alternating magnetic field was determined. A model of magnetic flux leakage testing (MFL) for weld defects is established by finite element method, and the reliability of the model is determined by law analysis and MOI experimental verification. Comparing MFL and eddy current detection with simulation method, the skin effect mechanism and rules of MOI for weld defects in alternating magnetic field are analyzed and obtained. Considering the effect of skin effect, different MFL detection models are established, and the detection ability of MOI for weld defects with different frequencies under corresponding models is studied and obtained. Finally, the MOI experiment is used to verify the results, which are consistent with the simulations. The skin effect rule and detection ability of MOI for weld defects obtained by simulation method can be used as the theoretical basis for practical experiments.     

榆神矿区煤炭开采的地下水动态演化规律

榆神矿区浅表层水资源短缺,生态脆弱,在划分主采煤层上覆含、隔水层组合类型的基础上,采用Visual Modflow软件构建煤层开采的地下水流数值模型,研究地下水流场演化规律,统计区内地下水位观测网(56个水文观测孔)近3年的有效观测数据,掌握首采煤层开采地下水位动态变化。结果表明:2020年第四系萨拉乌苏组潜水流场与2005年统测地下水流场形态基本一致,地下水位降深值在西南部达10 m;近3年的地下水位未发生明显变化,仅YS22钻孔处受村民井取水引起水位下降。研究成果对榆神矿区地下水资源保护与利用具有重要的指导意义。     

Shape from focus based on 3D structure tensor using optical microscopy

Shape from focus (SFF) is a widely used passive optical method for 3D shape reconstruction. In SFF, a focus measure, which is used to estimate the relative focus level, plays a critical role in depth estimation. In this article, we present a new focus measure for accurate 3D shape estimation in optical microscopy based on the analysis of 3D structure tensor. First, the 3D tensors are computed from the input image sequence for each pixel. Then, each tensor is decomposed into point, curve, and surface tensors by decomposing tensors into eigenvalues and eigenvectors. Finally, the surfaceness is used to measure the quality of sharpness. The proposed focus measure provides accurate focus values and better resistance against noise. The proposed measure is evaluated by conducting experiments using image sequences of simulated and microscopic real objects. The comparative analysis demonstrates the effectiveness of the proposed focus measure in recovering 3D shape.     

Mixing enhancement mechanism of combined H2–Water jets in supersonic crossflows in a combustor with an expanded section

To obtain the mixing enhancement mechanism of H₂–Water combined jets in supersonic crossflows in a combustor with expanded section for rotating detonation ramjet, the flow field shape and spray structure were studied by experimental and numerical methods. The Eulerian–Lagrangian method was used to investigate the diffusion mechanism and H₂–Water interaction law of combined jets with different sequences. At the same time, high-speed photography and the schlieren technique were used to capture the flow field. The effects of jet pressure drop, orifice diameter, orifice spacing, incoming Mach number, and other parameters on the penetration depth of water jets were studied. The results of experiment and simulation show that using H₂–Water combined jets, the penetration depth of the jet spray can be greatly increased and the jet mixing effect can be significantly improved, which will contribute to the engine's ignition and stable combustion. In the case of pre-water/post-H₂, the penetration depth of the hydrogen jet is greater. In the case of pre-H₂/post-water, the hydrogen jet raises the water spray mainly by protecting the integrity of the water column.     

海河平原区地下水累计可恢复超采量评价

地下水累计可恢复超采量评价对于地下水超采态势评判和超采综合治理实施都具有重要意义。本文以海河平原区为研究对象，提出超采量评价方法，旨在客观准确评价地下水累计可恢复超采量。针对浅层地下水超采量，提出生态临界水位作为传统“水位动态法”评价浅层地下水超采量的临界水位，据此得到研究区1959-2019年累计浅层超采量为869亿m³；针对深层地下水超采量，提出“不可恢复超采量”评价指标，采用地面沉降体积法评价深层地下水超采量，根据地面沉降体积计算深层承压含水层系统压密释水量体积，据此估算1970-2019年深层累计超采量为756亿m³；通过建立的一维非线性压密释水数值模型，模拟了深层承压含水层系统压密释水过程，计算得到非弹性压密释水量，评估研究区累计不可恢复超采量为558亿m³。因此本文认为，自1960年代以来，海河平原区地下水浅层和深层累计超采量1625亿m³，其中可恢复的超采量仅为1067亿m³。该研究结果可为未来地下水回补水量和南水北调规划调水量的确定提供参考。     

Corrosion resistance of Al–Cr-slag containing chromium–corundum refractories to slags with different basicity

Al–Cr slag is the solid waste generated by the smelting of Cr metal. It presents a range of environmental hazards. This study addressed the corrosion resistance of Al–Cr slag containing chromium–corundum refractories to slags with different basicity. Herein, we provide suggestions for the use of Cr–corundum of different basicity in kilns. Al–Cr slag, brown fused Al₂O₃, and chrome green were used as the raw materials, with pure calcium aluminate cement being used as a binder. The brick samples, prepared using different blends of chrome green and corundum, were fired at 1600?°C, and subsequently subjected to a slag corrosion test. After corrosion by slag of different basicity, the phase composition and microstructure of the sample were analyzed by X-ray diffraction, energy dispersive spectrometer and scanning electron microscopy. There were two major findings. First, Cr–corundum brick made from Al–Cr slag has a better slag corrosion resistance than that made from Cr₂O₃ and brown fused Al₂O₃. Second, Cr–corundum brick made from Al–Cr slag has superior corrosion resistance to slag with a CaO:SiO₂ ratio of 2:1.     

软岩与水相互作用研究综述

软岩是一类松散、破碎、软弱及风化膨胀性的强度较低的岩石,在水环境作用下软岩易产生大变形失稳破坏。大多数岩土工程事故都涉及到软岩与水的相互作用,研究软岩与水相互作用对于分析某些由软岩失稳引起的工程事故具有重要的理论和现实意义。针对软岩与水相互作用这一问题,从软岩与水相互作用的分类、软岩吸水特性的影响因素及其软岩吸水失稳机理等方面,对国内外具有代表性的研究成果进行了梳理。结果表明:软岩与水相互作用可分为力学作用、物理作用和化学作用。在各种影响软岩吸水特性的因素中,主要因素是黏土矿物的含量和种类、孔隙结构,其他影响因素有水压变化、软岩的干湿循环次数、软岩的块体尺度(尺度效应)和吸水时间等。软岩吸水失稳的根本原因是吸水后黏土矿物微观结构发生变化,而是否含蒙脱石等吸水性极强的黏土矿物并非直接原因;后者只是对软岩吸水过程起到促进作用。     

海藻酸钙固定化零价铁抗团聚及堵塞的作用机制

以海藻酸钠（SA）、氯化钙、微米零价铁（MZVI）为原料，制备了海藻酸钙（CA）固定化MZVI填料（CAZ），通过静态烧杯实验和动态PRB模型实验，探讨了CA运用对Cr(Ⅵ)的去除性能的影响，并通过电镜扫描分析了CA避免团聚、堵塞机制。实验结果表明，CA凝胶颗粒的运用能显著提升MZVI的除Cr(Ⅵ)性能，CAZ相比MZVI对Cr(Ⅵ)的去除率和反应速率分别提升7.1倍、23.0倍；MZVI利用率的提高是CAZ反应器处理Cr(Ⅵ)水量显著大于MZVI反应器的主要原因，MZVI反应速率的提高是CAZ反应器出水Cr(Ⅵ)浓度显著低于MZVI反应器的主要原因。电镜扫描结果表明，SA与氯化钙交联形成的CA具有丰富的骨架孔道结构，具有骨架支撑作用，能有效克服MZVI颗粒因重力作用导致团聚、降低比表面积的缺陷。CA表层固定的MZVI颗粒与Cr(Ⅵ)反应生成的(Fe_xCr_1-x)(OH)₃ 络合沉淀会冲破CA表层外壳，释放到零价铁-渗透反应墙（Fe⁰-PRB）系统中，导致PRB反应初期出现堵塞现象；大部分MZVI颗粒被固定在CA内部，CA内部有较多孔隙结构，这些孔隙结构会控制(Fe_xCr_1-x)(OH)₃ 络合沉淀释放，从而缓解了Fe⁰-PRB后期长期运行持续堵塞的问题。     

河流下浅埋深薄基岩煤层部分开采可行性分析

控制覆岩破坏高度是实现水体下安全开采的关键。针对“浅埋深、薄基岩、坚硬顶板”河流下压覆煤炭资源的问题，采用数值模拟的方法，计算了巷柱式和房柱式等部分开采的覆岩破坏高度，并从防水煤岩柱留设、岩梁极限跨度以及煤柱稳定性3个方面论述河流下部分开采的可行性。研究结果表明，部分开采能够很好地控制覆岩破坏高度，煤岩柱厚度基本满足留设防水安全煤岩柱要求；由于上覆基岩柱中存在厚度大于10 m的粗砂岩，在跨度小于8.53 m的情况下可以支撑上覆岩层；设计煤柱安全系数为1.28～1.81，均满足要求。采用采6 m、留6 m的巷柱（窄条带）式开采是最佳方案，面积采出率为50%，按总采出率45%计算，可解放河流压覆区域约52万t煤炭。     

自重湿陷性黄土地基预钻孔浸水处理的可靠度设计方法

为解决传统预浸水法存在的浸水时间长、浸水处理范围难以确定等不足,基于土体中水分运移规律,依据可靠度理论、极限状态设计方法及复合 Poisson 过程原理,提出一种消除黄土湿陷性的处理浸水方法——预钻孔浸水法。给出了利用预钻孔浸水法对自重湿陷性黄土地基进行浸水时,水平向及竖直向浸水影响范围的确定模型;在此基础上结合达西定律给出了浸水孔设计参数如孔深、孔间距及浸水孔个数的确定方法。结合铜川某工程,设计进行了现场预钻孔浸水试验,对该方法的合理性进行了验证,并通过现场钻探、现场勘探、室内湿陷性试验等方法对该方法的处理效果进行了评价。该浸水方法具有浸水时间短、浸水影响范围可根据浸水孔布设进行控制等优点,且浸水处理效果良好,完全符合施工要求。